You can use supplied Cable Ties to organize your wires and power cords.

2.Before using the robot on a rug with tasseled edges, please fold the rug edges under.

3.Keep robot away from wet areas, such as kitchen or bathing room.

4.The round base of some Bar Chairs ,Pedestal Tables ,Pedestal Fans and Floor Lamps which robot could climb onto will affect robot mapping & navigation. 
   
   So when robot cleaning, please remove these Bar Chairs ,Pedestal Tables ,Pedestal Fans and Floor Lamps with round base, or use supplied Boundary strip to block off problem areas.

5.Keep robot away from spaces between 2.56in/65mm--3.54in/90mm(Robot thickness is 3in/76 mm) to prevent robot from getting stuck, like sofa, cabinet or other furniture. 
   
   If necessary, you could use supplied Boundary Strip to block off the problem areas.

6.Anti-drop sensors will prevent robot from tumbling down stairs and steep drops in most cases. Anti-drop sensors are less effective if dirty or used on carpeted / reflective / very dark-colored floors.

        It's recommended to apply the provided Boundary Strip to block off areas where Anti-drop sensorsare less effective as described above.

7. The Robot may not run on certain darker black colored surfaces since the Anti-drop Sensors that recognize an edge or a stair may regard black color as an edge, then the robot will not clean over it.

8.Avoid cleaning high-pile rugs thicker than 0.78 in/20 mm, as they may cause Robot to malfunction.

9.While your robot is cleaning, do not pick it up and move it, or move the charging station— this could impact the robot's ability to map your home or back to charging station.



10.To keep Robot away from any area or item you do not want Robot to clean, apply the supplied Boundary Strip on the floor with the supplied adhesive tape to create a virtual barrier. 

        Robot wouldn't go cross boundary strips. Make sure the strips are placed FLAT on the floor.

Model：G6000/G7000/G8000PRO/G8000