[Error Voice] Put Robot on the floor before starting [L9000]
Cause:
1. The robot is lifted or suspended in the air.
2. The anti-drop sensor is dirty.
3. The robot is on a black carpet, causing the anti-drop sensor to mistake it for a cliff.
Solution:
1. Please relocate the robot to a level surface and restart it.
2. Clean the Anti-Drop Sensor with a damp cloth.
3. Set up a "No-Go Zone" or "Virtual Wall" on the black carpet to prevent the robot from going onto it.
4. Restart the robot.
If the problem persists, please reach out to us for assistance at support.us@tikom.com.
Model:L9000
— THE END —
Disclaimer: This article expresses the will of the release at the time, and if there is any misunderstanding, the final interpretation right belongs to Tikom.
