1. Take off Dust Bin & Water Tank from Robot.

2. Open blue rubber cover of Water Inlet and empty remaining water from water tank.

3. Press Release Button of Dust Bin Cover to Open Dust Bin and pour out dust into trash bin.

4. Open Pre-Filter to take out Pre-Filter, Sponge and HEPA filter from Filter Compartment on the Dust Bin Cover.

5. Clean HEPA Filter with the supplied cleaning brush.

Note: HEPA Filter can not be washed with water.

6. Rinse Pre-Filter,Sponge and dust bin with clean water without any detergent.

7. Dry Pre-Filter,Sponge and dust bin before usage.

8. Re-install HEPA Filter,Sponge and Pre-Filter into Filter Compartment, then put back dust bin into robot.

Notes:

1.The filters effectively prevent dust and dirt from entering the inside of the robot, which will protect its ventilation system and avoid secondary air pollution.

2.You can wash Dust Bin & Water Tank, Pre-filter and Sponge with Clean water. Be sure to air-dry them thoroughly before reassembling.

3.Do not wash the HEPA Filter with water, as it may damage the HEPA Filter and reduce the suction power.