1. Take out the Water Tank.

2. Open the water tank cover, fill it with water, and reseal it carefully.

Notes: Floor cleaners or disinfectants may damage the water tank, please don’ t add them into water tank. Only Clean water is suggested.

3. Attach the mopping cloth holder to the water tank.

4. Reinstall the water tank onto the robot.

5. Press Power button on Robot or Click Smart in APP to start mopping. The voice announces “Start Sweeping and Mopping”. In this mode, robot will sweep and mop in the same time.

In the app, there are three mopping water level settings: High / Medium / Low.

When adjusting the mopping water level through the app, Low level is indicated by 1 "Di",
Medium level by 2 "Di", and High level by 3 "Di". 

With a full water tank, the estimated mopping times are approximately 60 minutes for High level, 80minutes for Medium level, and 100 minutes for Low level.

The robot detects the mopping cloth holder for mopping functionality, so ensure that the mopping cloth holder is properly installed before mopping. 

If no water is dispensed during mopping, please check as follows:

Notes:

1.To avoid stinky smell of dirty mopping cloth, suggest to wash mopping cloth after each time mopping, and air-dry mopping cloth for next mopping. 

2.For good mopping with dry mopping cloth, suggest wet dry mopping cloth before mopping.

3.Because Carpet couldn’t be mopped, so please help to set “No-Mop Zone” in the Carpet place on APP, then when robot is installed with mopping cloth holder, robot wouldn’t sweep and mop this “No-Mop Zone”.And when robot doesn’t install mopping cloth holder, robot would sweep this “No-Mop Zone”.

Model: L8000