How to Clean HEPA Filter, Dust Cup & Cyclone Unit [V850]
Youtube Link: Tikom V850: How to Clean Dust Cup?
1. Push "Dust Cup Release Button" to take off Dust Cup from Vacuum Cleaner.
2. Take off the Cyclone Unit and HEPA Filter from the Dust Cup.
3. Firmly tap the HEPA filter to shake off the dust lodged in its tiny pores and restore proper airflow.
4. Do not wash the HEPA filter with water, as this may cause clogging and reduce suction performance.
5. Use scissors to cut and remove hair entangled on the Cyclone Unit.
6. Please note that the steel mesh around the Cyclone Unit may be surrounded by dust buildup, which can block airflow and reduce suction performance.
7. Wash the Dust Cup and Cyclone Unit by water.
8. Air dry the dust cup and Cyclone Unit.
9. Install Cyclone Unit and HEPA Filter into the Dust Cup.
10. Align the arrows on the main unit and the dust cup.
11. Align the protrusion on the main unit withthe recess on the dust cup.
12. Push the dust cup toward the main unit until you hear a click, indicating that the dust cup is properly installed.
Model: V850
— THE END —
Disclaimer: This article expresses the will of the release at the time, and if there is any misunderstanding, the final interpretation right belongs to Tikom.
